RoPump DN 600 pumping stations are used to equalize height differences and are intended for pumping water.

Equipment: shaft, submersible pump with base, level switch, non-return valve, shut-off valve, pressure line, cover.

Pump shafts are made of polyethylene. They are resistant to loads during installation and operation of the pumping station.

Operation: When the wastewater level in the pumping chamber reaches a certain height, the pump is switched on. The pump is switched on and off by a level switch or a corresponding sensor. The size of the pump chamber and the level for switching on the pump is determined by the amount of inflow, the capacity of the pump or the number of starts of the pump in one hour. The pressure line is equipped with a non-return valve, which prevents water from flowing from the pressure line back into the pumping station. The shut-off valve on the pressure line closes in the event of a pump failure.