Pumping shafts

Purpose and use

Pump shafts are containers made of nature-friendly polyethylene material [PE] and are intended for the installation of components that form pumping stations. They are an excellent solution for the composition of meteor and sewage pumps or other media. They are suitable for installation on walking and driving surfaces such as yards, sidewalks, parking lots and roads. The method of installation and the construction of the shaft make access to the pumping station easy and safe.

Advantages of pumping shafts

Installation of components and connection of the pumping station is easy and fast. Only technologically advanced and developed shaft shapes enable this.

The shaft is made according to the requirements of the project and the client; it is made in appropriate heights and shapes, with the possibility of making a complete pumping station with all the necessary equipment installed.

Assembly and installation

The pump shaft is made of polyethylene [PE] ro using rotomoulding technology and is available in diameters DN 800, DN 1000, DN 1200 and DN 1500 with the possibility of different heights from 1 m to 5 m.

The spherical bottom of the pumping shaft with a base enables the depletion of the entire amount of medium and easy underground installation with the possibility of installation next to high groundwater with anchoring. The body of the shaft is characterized by flat surfaces that allow connections of inlets and outlets in different places. The shaft cone with an opening with a diameter of DN 600 is suitable for the installation of a PE cover or the construction of an cast iron cover with a relief ring in the case of passability.

The shaft is manufactured in accordance with the standard SIST EN 13598-2: 2009, which determines the suitability of the shaft for impact resistance, circumferential stiffness, watertightness and load-bearing capacity of the shaft.

PUMPING SHAFTS

ROTO-crpaliscni-jasek-DN800

DN800

Shaft height [H]
Code
1000 mm
7600051210
1250 mm
7600051220
1500 mm
7600051230
1750 mm
7600051240
2000 mm
7600051250
2250 mm
7600051260
2500 mm
7600051270
ROTO-crpaliscni-jasek-DN800-dimenzije
ROTO-crpaliscni-jasek-DN1000

DN1000

Shaft height [H]
Code
1000 mm
7600058460
1250 mm
7600058080
1500 mm
7600058400
1750 mm
7600058490
2000 mm
7600058110
2250 mm
7600058620
2500 mm
7600058630
2750 mm
7600058640
3000 mm
7600058150
ROTO-crpaliscni-jasek-DN1000-dimenzije
ROTO-crpaliscni-jasek-DN1200

DN1200

Shaft height [H]
Code
1250 mm
7600051280
1500 mm
7600051290
1750 mm
7600051300
2000 mm
7600051310
2250 mm
7600051320
2500 mm
7600051330
2750 mm
7600051340
3000 mm
7600051350
ROTO-crpaliscni-jasek-DN1200-dimenzije
ROTO-crpaliscni-jasek-DN1500

DN1500

Shaft height [H]
Code
2000 mm
7600051360
2250 mm
7600051370
2500 mm
7600051380
ROTO-crpaliscni-jasek-DN1500-dimenzije

Inquiry