RoPump DN 800 Domestic Pumping Station
#PumpingStation
#WastewaterTechnology
#Drainage
#DualPump
#CivilEngineering
#WaterTechnology
#PEShaft
RoPump DN 800 – Domestic Pumping Station with Dual Pump System
The RoPump DN 800 is a high-performance domestic pumping station designed to convey wastewater from lower-lying areas up to the level of the sewer network, a wastewater treatment plant, or a septic tank.
It is deployed in any situation where drainage by gravity flow is not possible.
Typical Areas of Application:
- Residential and vacation homes
- Commercial buildings
- Agricultural operations
RoPump DN 800 in detail.
At the heart of the system stands a robust polyethylene (PE) shaft, specifically engineered to meet the demands of underground installation as well as continuous operation. The material is corrosion-resistant, durable, and capable of withstanding both the mechanical stresses of installation and the sustained loads of ongoing use. Its compact DN 800 design allows for space-saving integration while ensuring high performance.
Equipped with two submersible pumps, the DN 800 offers enhanced operational reliability and is particularly well-suited for applications involving higher inflow volumes or stringent requirements for system redundancy.
Scope of Delivery:
• DN 800 Shaft
• Submersible Pump
• Two Float Switches
• Check Valve, Shut-off Valve, and Discharge Pipe
• Feka VS with Lifting Device
The control unit and cover are not included in the scope of delivery. For control units and additional options, please refer to the accessories section.
Operation: When the wastewater level in the pump sump reaches a specific height, the pump is switched on. The switching on and off of the pump must be controlled by a level switch or a corresponding sensor. The size of the pump sump—as well as the level at which the pump is to be activated—is determined by the inflow volume, the pump’s capacity, or the maximum number of switching cycles per hour. The discharge line must be equipped with a check valve to prevent water from flowing back from the discharge line into the pump sump. A shut-off valve on the discharge line must be closed in the event of a pump failure.
Technica Data and Dimensions
Pump types
The following pump types are available:
Advantages
The RoPump DN 800 domestic pumping station offers a wide range of advantages. Here is an overview:
Economic Viability & Efficiency
- Automatic operation via level switch → demand-based switching (on/off), reduced energy costs.
- Optimized pump cycles based on inflow volume → reduced wear, longer service life
- Compact DN 600 design → minimal space requirements and rapid installation
- Pre-configured system (pump, valves, pressure line) → reduced on-site assembly time
Safety & Structural Analysis
- Polyethylene shaft → high resistance to mechanical loads during installation and operation
- Check valve prevents backflow → Protection against flooding of the pump sump.
- Shut-off valve for maintenance and fault situations → enables safe shutdown
- Integrated Manhole → Safe Access for Inspection and Service
- Designed for defined switching cycles → reliable operation even with fluctuating inflow.
Sustainability & Maintenance
- Durable PE material → corrosion-free and low-maintenance
- Efficient submersible pump → reduced operating costs over its service life
- Lifting Device (Feka VS) → Fast and easy maintenance without complex disassembly
- Modularly expandable (control system optional) → adaptable to project-specific requirements
Accesories
The following accessories are available:
Code | Description | Cover |
|---|---|---|
7100520370 | Cover DN 800 with Frame, Hinged (Green) | H8 |
Code | Description |
|---|---|
7200088830 | Control Unit for Pumping Station SMART EVO 1 (for one 230 V pump) |
1290087 | SMART EVO 1 Pump Station Controller
(for one 230 V pump with GSM module) |
720008840 | SMART EVO 2 Pump Station Controller (for 2 pumps, 230 V) |
1290088 | SMART EVO 2 Pump Station Controller
(for 2 pumps, 230 V, and GSM module) |
1290089 | Control Unit for Pump Station SMART EVO 2 3F 7.5 kW |
1290090 | Control Unit for Pump Station EXPRESS D2-MONO |
Code | Description |
|---|---|
R000285 | Coarse Solids Separator for Pumping Station DN600 |
R000278 | Coarse Solids Separator for Pump Station DN800 |
R000417 | Coarse Solids Separator for Pump Station DN1200 |
R000400 | Stainless Steel Guide for Coarse Material Separator DN600 |
R000401 | Stainless Steel Guide for Coarse Material Separator DN800 |
Code | Description |
|---|---|
R000386 | Guide for Coarse Solids Separator DN600 | Height: 725 mm |
R000387 | Guide for Coarse Solids Separator DN600 | Height: 1025 mm |
R000388 | Guide for Coarse Solids Separator DN800 | Height: 725 mm |
R000389 | Guide for Coarse Solids Separator DN800 | Height: 1025 mm |
R000416 | Guide for Coarse Solids Separator DN1200 | Height: 1077 mm |
Code | Description |
|---|---|
7200088850 | Water Level Monitoring (Flood) MF 220 |
7200088860 | Connection for pressure line DN 50 |
52076 | Level Sensor ET |
1290016 | Float Switch for Pump Station – 10m Cable |
1290086 | Float Switch for Pump Station – 20m Cable |
Code | Description |
|---|---|
7200088310 | Outdoor Pedestal P4 (455 x 235 x 1350 mm) |
7200088890 | Outdoor Column P4.5 (402 x 300 x 1280 mm) |
7200088670 | Outdoor Column P5 (625 x 420 x 1400 mm) |
7700000020 | Access Shaft Extension for RoPump DN600 (600 x 750 mm) |
7106548710 | Access Shaft Extension for RoPump DN800 (800 x 750 mm) |
7106548720 | Dome Extension for RoPump DN1000 (1000 x 750 mm) |
Installation
Installing the RoPump is simple due to its shape and light weight. You can find more detailed information in the installation instructions.
Other RoPump Variants
RoPump DN 600
Compact pumping station with one pump and a 600 mm shaft – ideal for smaller applications.
RoPump DN 800
Dual-pump system with 800 mm shaft – for higher flow rates and increased safety.
selected
RoPump DN 1200
High-performance solution with two pumps and a 1,200 mm shaft—for high wastewater volumes.
For enhanced operational reliability and to handle larger volumes of wastewater.
Made of robust, corrosion-free LLDPE (linear high-density polyethylene).
An alarm or control box is optionally available.
Für Wohnhäuser, gewerbliche Gebäude und landwirtschaftliche Betriebe.
